Changing Trailer from Hub-Centric Rims with Bolts to Lug-Centric Rims with Studs and Nuts
Question:
I HAVE BOLTS IN MY PRESENT HUBS...I AM CHANGING TO HUBS WITH STUDS AND NUTS.. DO I NEED TO BE CONCERNED WITH THE SIZE OF THE CENTER OPENING OF MY NEW RIMS, IF THEY ARE LARGER THE THE HUB???
asked by: JIM
Expert Reply:
Your original rims are the hub-centric type, meaning that the pilot hole in the center of the rim provides the centering for the rim on the hub. In the lug-centric type that you are switching to the centering of the rim on the hub is provided by the alignment of the lugs.
As long as your new rims have a pilot hole that is larger than the center of the hub (to fit over it) and your wheel studs line up and thread on properly then you are all set.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Search Results: 6x5.5 hub
- Search Results: trailer locks
- Video: Review of Demco Straight Tongue Trailer Coupler - Standard Coupler - DM13203-52
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-655-35-K
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-35-K Review
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 5-1/2
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 3" Pilot Hole
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Q&A: Can Old Grease Seals Be Reused When Changing Trailer Bearings
- Search Results: st175 80 r13
- Search Results: st175 80d13 load range d
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Shop: Trailer Wiring
- Q&A: Recommended Hub And Drum for Electric Brakes With 4 On 4 Bolt Pattern For 1973 Scamp Trailer
- Q&A: What Height is Recommended When Setting the Fender Height Above the Trailer Tire?
- Q&A: Can 15 Inch Trailer Tires be Replaced with 16 Inch Trailer TIres
- Search Results: electric over hydraulic trailer brakes
- Q&A: Correct Replacement Hub for 2005 Karavan KKR-1800-70
- Video: Timbren Trailer Suspension - Cushioned Suspension - TSR3500S06 Review
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: asr2khds03
- Search Results: timbren
- Video: Ark Extreme Off-Road Trailer Jack Review
- Video: Redline Tires and Wheels 25-51 Review
- Shop: Vehicle Engine Heaters