Recommended Load Assist and Kayak Carriers For a 2023 Rivian R1T with a Factory Roof Rack  

There are a couple things that you can try for fitting the Rhino-Rack Universal Load Assist #RR-RUSL on your crossbars with the J-style carriers installed. The first would be to try some of the different clamp sizes, the load assist should have come…

Yes, the Rhino-Rack Universal Load Assist part #RR-RUSL will work with a j-style kayak carrier like the Yakima JayLow Kayak Carrier part #Y04073. I have attached a photo for you of this load assist being used with similar j-style kayak carriers.

Yes, you will be able to use the Rhino-Rack Universal Load Assist #RR-RUSL with the Rhino-Rack Heavy-Duty Roof Rack Crossbars and Yakima Bowdown J-bars on your Ford F-150 Supercrew. Do note that the support pole for the load assist maxes out at…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…