Correct Replacement Cover for a TruXedo Lo Pro QT Tonneau On a 2017 GMC Sierra 1500

Question

Question:

I am looking for a replacement truxedo low pro QT cover for my truck. My truck is a 2017 GMC Sierra crew cab with the 58inch long bed. The serial number of the cover I have is 027199205. Do you sell this replacement cover? Thanks,

asked by: Danny J

1

Helpful Expert Reply:

For your TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX571801 on your 2017 GMC Sierra 1500, you are going to want the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover # TX5718-CVR for a replacement cover.

Just enter your S/N or date code of your tonneau in the "Enter a Serial Number or Date Code" box and you'll be good to go.

expert reply by: Bryce D

1

Answer 1

It sounds like the tonneau cover you have is the #TX570601 which means the replacement tarp is the part #TX1117930.

view full answer...

Answer 2

There are two TruXedo Lo Pro Soft Roll-up Tonneau Covers available for the 2015 Chevrolet Silverado 1500 with a 5-1/2' bed. You will have to identify which one you have in order to choose the correct replacement tarp. The #TX571801 uses…

view full answer...

Answer 3

We definitely have the replacement cover you need! Based off your instruction photo, you have the TruXedo Lo Pro QT model. I confirmed that this model is the exact same as the TruXedo Lo Pro Soft Roll-up Tonneau Cover - Black #TX570601 that is…

view full answer...

Answer 4

Most likely you'll need the #TX1117651 replacement tarp assuming that your original cover was a Truxedo Edge, #TX881101. If you could find the part or serial number on the existing header or cover, I can verify for sure. The header should have a…

view full answer...

Answer 5

The replacement TruXedo Lo Pro Soft Roll-up Tonneau Cover for your 2017 Chevy Silverado 1500 with a 5-1/2 foot bed is the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover - Black item #TX5718-CVR.

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give you…

view full answer...

Answer 8

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 9

SumoSprings would definitely be the solution I would recommend for your squatting concern. The SumoSprings Solo Custom Helper Springs - Rear Axle item #SS45MR have a 2,800 lbs capacity which would eliminate that carolina lift look you get when your…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...