Replacement White Nylon Roller for Retrax XR Tonneau Cover

Question

Question:

I need a replacement white plastic roller for my retrax xr cover. It is the roller closest to the tailgate, drivers side. How can I obtain a replacement part?

asked by: Jason D

0

Expert Reply:

It sounds like you're describing the Replacement White Nylon Lock Stop for Retrax Hard Tonneau Covers # RTX44FR.

If you're talking about a different part feel free to shoot me some photos of the part you're needing along with the model number of your tonneau cover or the year/make/model and bed length of your pickup.

expert reply by: Jon G

0

Answer 1

I'm so sorry to hear about your cover! Thanks so much for attaching photos of the issue. I reached out to my tech at Retrax, and he said that judging by the lack of a lock on the passenger's side, you have a Retrax XR cover. The…

view full answer...

Answer 2

The lock core is hidden within the lock assembly for the RetraxPRO MX Hard Tonneau Covers, like part #RTT-80383 that fits your 2022 F-250 6-3/4' bed, so if you were to lose the key then you can use the Replacement Lock Assembly with Keys…

view full answer...

Answer 3

The RetraxPRO XR Hard Tonneau Cover w/ Trax Rails - Retractable - Aluminum - Matte #RTT-80384 has a canister that is 13-3/4 inches wide and sits 11-5/8 inches deep from the top of the bed rail. The RetraxPro and the Pace Edwards Jackrabbit…

view full answer...

Answer 4

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 12

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...