Are There Any RV Vent Covers That Will Allow The Vent Lid To Fully Open

Question

Question:

I have two Fantastic Fans. It appears that most vent covers will not allow the fan cover to fully open. Will this cover allow the cover to fully open? Thanks -

asked by: Dave

0

Expert Reply:

No vent cover on the market is tall enough to let the vent to fully open lid, but this is known by the manufacturers who all state that the covers allow the lids to open enough for the vent to properly operate. Powered lift vents should stop once they feel resistance and for manual lift vents you would just need to stop once the vent lid touches the cover.

The Dometic Ultra Breeze Trailer Roof Vent Cover # DMC38FR is going to require you to remove four of the mounting screws on the vents to add in the mounting brackets so you'll want to pick up some self leveling sealant # 34427034145-1 to cover the screws again once the brackets are in place.

expert reply by: Kevin C

0

Answer 1

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 2

The pin weight of a 5th wheel trailer will usually be around 20% of the trailer's gross trailer weight (GTW) rating. The only real way to find the loaded pin weight of your 5th wheel trailer would require access to a commercial scale used…

view full answer...

Answer 3

I believe instead of fix you meant fit, and yes, the MaxxAir Standard RV and Trailer Roof Vent Cover #MA00-933069 willf it over a 12" x 12" roof vent.

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 12

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Are There Any RV Vent Covers That Will Allow The Vent Lid To Fully Open

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching