Bolt Sizes and Bracket Dimensions of Chain Hangers for Curt Weight Distribution Systems
Question:
what height,width and length of the bracket. what size bolts come with it.
asked by: Garry L
0
Expert Reply:
I went out to the warehouse and pulled Curt chain hanging brackets # C17003 to take some measurements. There are 2 sets of bolts included. The short set is 1/2-13 x 2 inches and the longer set is 1/2-13 x 3-1/2 inches.
The brackets measure 4 inches long (measuring front to back along the trailer frame). They are 3-3/8 inches tall on the inside and 3-5/8 inches tall on the outside. And they are 3-3/16 inches deep on the inside, 3-13/16 inches deep on the outside. I have included a picture showing the bracket measurements.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Chain Hangers for Curt Weight Distribution Systems - Clamp On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- CURT
more information >
Continue Researching
- Shop: Chain Hangers for Curt Weight Distribution Systems - Clamp On
- Shop: Chain Hangers for Curt Weight Distribution Systems - Bolt On
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Shop: Brake Controller
- Shop: Replacement Lift Bracket for Curt Weight Distribution Systems
- Search Results: curt weight distribution hitch
- Shop: Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW
- Q&A: Does the Trailer Need to Be Jacked Up to Install Chains on Chain Hangers # C17003
- Q&A: Would the Curt Chain Hanger part # C17003 fit 3 Inch Channel Trailer Frame
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Video: Review of Curt Weight Distribution - WD Only - C17333
- Search Results: 3020~p
- Shop: Windshield Wiper Blades
- Q&A: Replacement Motor for Lippert Stabilizer Jack 113407
- Q&A: Replacement Stabilizer Jacks for Lippert Components Jack # 113407
- Search Results: load bar
- Search Results: curt 17001
- Search Results: curt wdh
- Search Results: curt 17002
- Q&A: Do Alternate Chain Lift Brackets C17003 Change Setup of Weight Distribution Hitch
- Q&A: Placement and Orientation of Tekonsha P3 Brake Controller
- Q&A: Can Curt Chain Hanger Brackets be Used with a Pro Series Weight Distribution System
- Video: Review of Curt Weight Distribution Hitch - WD Only - 17302
- Video: Review of CURT Weight Distribution Hitch - MV 14K W.D. with Sway Control - C17063
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch