bing tracking image
Q & A Icon

How to Find Replacement Hubs for 2005 Pace Enclosed Trailer  

Question:

I’m looking to replace my wheel hubs on a 6x12 enclosed pace trailer 2005 model WS6 DGVW 3000 could you point me in the right direction thanks for your time

0

Expert Reply:

In order to find the correct replacement hubs you can either identify your axle with the axle tag or measure your spindle/bearings. Assuming the manufacturer is still in business, you can identify the axle based on the serial number. If the axle tag is missing or worn, go ahead and measure using a digital caliper like # PTW80157.

You can measure the inner diameter of your bearings, or the spindle where the bearings ride. It may also be possible to identify them with part numbers if they're stamped in the side. See the helpful diagram below. Once you have identified your bearings you will be able to find the right replacement hub.

For example, if you found that you have inner bearings # L68149 (1.378" ID) and outer bearing # L44649 (1.063" ID) you are looking for standard 3,500 lb hub assemblies. If you need an idler hub you could use the # AKIHUB-545-35-EZ-K or for a hub and drum # AKHD-545-35-EZ-K. If you also needed brakes you could use the # AKEBRK-35-SA.

I have attached a link below to all of our available hub assemblies. These can be sorted out by bolt pattern, capacity, and bearings. I also included a link to our bearings and seals that can be filtered by inner diameter to help you identify what you have. If you aren't sure, please feel free to send me the measurements and I will help you find the correct hub.

expert reply by:
0
Robin H
Spindle, Hub, Bearing and Seal Information.
Spindle, Hub, Bearing and Seal Information.
(click to enlarge)

Products Referenced in This Question






Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>