Correct Replacement Tarp For a TruXedo Pro X15 Cover on a 2005 GMC Sierra 2500 with 6.5' Bed

Question

Question:

Dear etrailer I am looking for the replacement skin for a TruXedo Pro X15 tonneau cover. Does your replacement TX1459601-CVR fit a 05 GMC Sierra 2500 SHORT BED 6foot 6inch . Need to replace because of Hail Damage! Thanks

asked by: David W

0

Expert Reply:

No, the Replacement Tarp for TruXedo Pro X15 Soft Tonneau Cover # TX1459601-CVR would not be the correct replacement tarp (skin) for your 2005 GMC Sierra 2500 with 6.5' bed.

The correct TruXedo Pro X15 for your Sierra is the TruXedo Pro X15 Soft Tonneau Cover # TX1481101 which makes the correct replacement tarp/skin the Replacement Tarp for TruXedo Pro X15 Soft Tonneau Cover # TX1481101-CVR.

expert reply by: Scott S

0

Answer 1

Thank you so much for the picture and information! The Replacement Tarp item #TX2568-CVR is exactly what you need. This is the replacement tarp for the TruXedo TruXport Soft, Roll-Up Tonneau Cover item #TX256801 that is confirmed to fit the 2012…

view full answer...

Answer 2

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

Yes, the Replacement Cover #PE48UV will indeed fit the 2018 Ford F-150 extended cab with the 67" bed. This is made to be a replacement cover for the Pace Edwards JackRabbit Retractable Hard Tonneau Cover #311-JRFA05A28 which is specifically for…

view full answer...

Answer 8

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

view full answer...

Answer 9

I spoke with my B&W representative who confirms that to install their GNRK1121 #BW77FR Turnover Ball hitch on a 2021 Ford F-150, the center of the 4 inch hole for the gooseneck ball would be placed 42-5/8 inches forward of the rear edge of the…

view full answer...

Answer 10

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 11

Shackle bolts have a nut that needs to get held with a wrench or socket while tightening them down. If you didn't use a wrench or socket when you initially installed the shackle bolts you could go back now with one so that you can tighten them…

view full answer...