SumoSprings Trailer Helper Springs Fitment on a 2023 Grand Design XLS 23LDE

Question

Question:

Do you make this for the 2023 Grand Design XLS 23LDE?

asked by: Kevin

0

Expert Reply:

According to my research your 2023 Grand Design XLS 23LDE should have tandem 3,500 lb axles in an "underslung" (leaf springs below the axles) configuration. This means you need two of the following SumoSprings kit:

- SumoSprings Trailer Helper Springs w/ Line Relocation Bracket # TSS-106-40

If the leaf springs happen to be sitting above the axles then you need the "overslung" version instead:

- SumoSprings Trailer Helper Springs w/ Line Relocation Bracket # TSS-107-40

Let me know if you have any other questions!

expert reply by: Jon G

0

Answer 1

The spacers included with the SumoSprings Trailer Helper Springs #SS26MV are required to get it the 6-1/2" height. Without the spacers the required clearance drops to 5-5/16". Per SumoSprings you can add additional spacers to fit the…

view full answer...

Answer 2

We do have the trailer SumoSprings for your Grand Design Reflection with 5,080 lb GAWR axles and with leaf springs over your axles. What you need is the following: - SumoSprings Trailer Helper Springs #SS26MV The #SS26MV are for 5k to 8k overslung…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

SumoSprings Trailer Helper Springs Fitment on a 2023 Grand Design XLS 23LDE

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching