Replacement Hub with 4 on 4 Bolt Pattern
Question:
I am looking for a 4 on 4 hub assembly that has an od of the out side of the hub of 2.31. Do you have anything like that?
asked by: Scott
Expert Reply:
A hub assembly like the # AKIHUB-440-2-1K you looked at with a 4 on 4 bolt pattern has a diameter of 5-1/2". At 2.31" you wouldn't be able to fit that bolt pattern on the hub since 4 on 4 implies 4 bolts with a circle that forms a 4" diameter.
Typically you want to match up the bearings when looking for a replacement. This uses # L44643 bearings with an inner diameter of 1.00". The other option would be the # AKIHUB-440-2-EZ-2K which uses # L44649 bearings that have a 1.063" ID. You can either look for part numbers on your existing bearings, or measure using a digital caliper like # PTW80157 to identify them.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: How to Measure a Trailer Axle
- Q&A: How to Find the Spindle Number on a Trailer Axle
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Article: Trailer Lighting Requirements
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Replacement Hubs, Tires, and Wheels for Calkins Boat Trailer with 3,500 Pound Axle
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Article: How to Tell the Weight Rating of a Trailer Axle