How To Install Curt Trailer Hitch Receiver # C13315 On a 2023 Mazda CX-5 with No Weld Nuts?
Question:
Im installing a trailer hitch Curt 13315 on a 2023 Mazda CX-5. The front bolts are supposed to go into weldnuts on the Mazda frame, but there are no weldnuts. Is there a workaround?
asked by: Michael D
Expert Reply:
First I have linked an installation video for the Curt Trailer Hitch Receiver # C13315 below. This shows an installation on a 2023 Mazda CX-5 and the threaded holes are located very close to a open hole but the threaded hole is covered with a thin tape making it difficult to see. You will want to make sure you are looking at the correct hole location first.
If the hole is there but does not included a threaded insert you should be able to locate a square hole spacer, carriage bolt and flange nut locally you will be able to use to complete the installation. Be sure to use grade 8 hardware for the installation.
If you do not have any hole I recommend contacting your local Mazda dealer to see about having the holes drilled in the correct location and if possible to have the weld nuts inserted as well.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Replacement For A JVR9000R RV Stereo System With Three Cameras
- Q&A: Taillight Converter Needed To Separate Brake Lamp and Turn Signal Circuits
- Q&A: Option to Replace Jensen JRV9000R
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Replacement for Gabriel Shock Model 610712
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: How to Measure a Trailer Axle
- Article: Which Hitches are Made in the USA
- Q&A: Replacement Hubs and Brake Assemblies for Dexter Mobile Home Axle and 8-147 Hubs
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop