Is There a Sticker or Certificate Showing The Vertical Load Rating For The BulletProof # ED308?

Question

Question:

BulletProof Hitches 2-Ball Mount for 3 Hitch - 9-1/4 , 8-1/4 Rise - 36,000 lbs Item # ED308 I have one more question regarding the above dried product. It looks like it has a 36000lbs sticker, but is the 6000lbs vertical load imprinted on the body or is there a sticker attached? Or does it come with a certificate?

asked by: Hiroshi W

0

Expert Reply:

The BulletProof Hitches 2-Ball Mount # ED308 only lists the maximum trailer weights on the sticker placed on the shank. They do not list the vertical load rating on the body of this hitch nor do they provide any certificates with the receiver. I do recommend getting the InfiniteRule Locking Pins # 34061674-D to secure the ball mount in your receiver.

expert reply by: Bud M

0

Answer 1

I have a solution for you, but the small pin included in InfiniteRule Locking Pins for B & W Tow and Stow 10K and 14.5K Ball Mounts - Qty 4 #34061775-D is not long enough to work well with a 3" receiver. Instead, I recommend going…

view full answer...

Answer 2

Since you mentioned needing "at least" 8 inches we'll go ahead and be on the safe side and get you a little more, with a hitch ball mount from BulletProof Hitches that gives you a max of 9-1/4" drop. I'll…

view full answer...

Answer 3

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 4

Thanks for the picture! To tow a trailer and haul a bike rack off of your Thor Magnitude's hitch, I recommend the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item #325-GH-514. This adjustable ball mount has four 2" receiver openings…

view full answer...

Answer 5

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

view full answer...

Answer 6

Most pintle hooks use a standard bolt pattern which is 3-3/8" horizontally center to center and 1-3/4" vertically center to center (see photo). Therefore, the Pintle Hook part #C48231 would be a direct fit and work well for you. It also…

view full answer...

Answer 7

The Pintle Hook #C48215 that you referenced does include mounting hardware to attach to a pintle hook plate like the Super Titan Forged Pintle Hook Plate #RP38186 that you referenced. I also pulled these two parts and was able to determine that they…

view full answer...

Answer 8

If the trailer hitch has a 3/4" diameter hitch pin hole then that is what you'll need to use when towing with said hitch even when using an adapter such as the Curt Hitch Receiver Reducer Sleeves part #C45408. If you don't have a…

view full answer...

Is There a Sticker or Certificate Showing The Vertical Load Rating For The BulletProof # ED308?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching