Determining If TrailerValet TVRVR9 Will Contact Jack Foot On 2023 Airstream 27FB

Question

Question:

I have a 2023 Airstream 27FB Globetrotter, with a max. GVWR of 7,600 lbs and a hitch weight of 875 lbs. The trailers tongue jacks foot doesnt appear to be removable, as it doesnt have a pin. My question is, is the RVR 9s hitch ball mount high enough to clear the trailers tongue jacks foot without interfering with the trailer valets function? In all the photos on your website there is only one photo of an Airstream trailer and I cant tell from the photo is the foot of the tongue jack is on. Also, all the other trailers pictured have removable feet on the tongue jack. Thank you for you help with this question. David

asked by: David

0

Expert Reply:

I reached out to TrailerValet and the # TVRVR9 you were looking at measures 6.53" from the center of the hitch ball to the front edge of the tracks as shown in the below diagram.

You'll need to measure from the center of the coupler on your 2023 Airstream 27FB to the jack foot to see if you're going to have any contact or not. You may be ok as long as you raise the jack all of the way, but measuring is the only way to be sure.

If you do not have enough clearance you'll need to replace your jack with one that has a removeable foot.

expert reply by: Samuel C

0

Dimensions Of TrailerValet TVRVR9
(click to enlarge)

Answer 1

Though I am not in contact with this customer and am not 100% about what the exact issue was, the only plastic socket he may be referring to is the plastic wheels. The cause of these breaking will not be due to the weight, but rather by having…

view full answer...

Answer 2

I'm sorry to hear that your trailer dolly didn't work out as well as you had hoped. Since you plan to use the Trailer Valet RVR9 Remote-Controlled Trailer Dolly #TVRVR9 in areas that aren't always smooth and level, I would like to share…

view full answer...

Answer 3

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

If your 2022 Chevrolet Tahoe does not have the factory tow package then the plug may not be there. If this is the case you would need to hardwire in a brake controller. If your Tahoe does have the tow package then the plug will be under the dash. The…

view full answer...

Answer 7

I do have an option for you but we have not yet gotten out hands on a 2019 Chevrolet Blazer therefore, have not had the chance to look for the brake controller wiring port either. I checked with both Tekonsha and Curt and it looks like they have not…

view full answer...

Answer 8

The factory trailer brake controller port on your 2021 Chevrolet Tahoe is located underneath the dash just to the left of the steering wheel. It will be taped to another harness so it may take a bit of looking to find. Keep in mind that if your Tahoe…

view full answer...

Answer 9

We do not offer wishbone wiring that has a ground wire going down both sides. You really don't need it because the ground wire is for the plug itself not the lights and you want the ground close to the plug. I recommend using the 4-Way Wishbone…

view full answer...

Answer 10

It sounds like you have a wishbone wiring harness install on your trailer. A regular 4-way wiring harness has 4 wires from the back of the connector, 1 for left turn/brake typically (yellow), 1 for the right turn/brake typically (green), 1 for the…

view full answer...

Answer 11

For your AL-KO 7210 braking assembly, you can use the Hydraulic Brake Kit #AKFBBRK-7 as a replacement. These braking assemblies measure 12" x 2", bolts onto a 5 bolt mounting flange, will work with wheel sizes from 14-1/2" to…

view full answer...

Answer 12

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Determining If TrailerValet TVRVR9 Will Contact Jack Foot On 2023 Airstream 27FB

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching