How Do the Spring Support RV Cabinet Door Hinges Work

Question

Question:

How does the spring support hinge fora cabinet door work?

asked by: Dan

0

Expert Reply:

One side of the Spring Support RV Cabinet Door Hinges # 37270705 gets screwed to the inside of the cabinet and the other side is screwed to the cabinet door. The hinges are labeled as to what side goes on the cabinet door and which goes inside the cabinet.

They are spring loaded to hold the cabinet door open and then as you push the door shut they will snap shut. Essentially they are just making it to where you have to apply pressure to both open and close the cabinet door.

I have also included a video in which the presenter demonstrates how they function.

expert reply by: Scott S

0

Answer 1

Yes, the hinge part #37270705 that you referenced can be used on overlay doors like you have.

view full answer...

Answer 2

The only cabinet hinges we carry that could possibly work with the cabinet doors you have is the Spring Support RV Cabinet Door Hinges #37270705. These fold and are spring loaded to fit the style of cabinet door you've built. They give you some…

view full answer...

Answer 3

The RV Cabinet Door Struts #37270545 has installation instructions included with it that I've also attached a picture of below.

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The temperature light on your Everchill RV Refrigerator w/ Freezer #324-000119 is likely flashing because of a lack of full power to the fridge. The fridge requires 11 amps. It is likely trying to use more power than what is available which is why…

view full answer...

Answer 12

A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned you…

view full answer...

How Do the Spring Support RV Cabinet Door Hinges Work

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching