Can I Use the Hollywood Racks RV Rider Bike Rack Behind a Motorhome?

Question

Question:

Can I use the Hollywood bike rack on the motorhome hitch that I also use to tow my car?

asked by: Larry

1

Helpful Expert Reply:

Thanks for the picture! Yes, you can. The Hollywood Racks RV Rider Bike Rack item # HLY64FR is rated to be used on all motor vehicles and motorhomes. It looks like you are using a dual hitch adapter. You will want to make sure you're not exceeding its tongue weight capacity.

The Hollywood Racks RV Rider Bike Rack item # HLY64FR weighs 75 lbs and has a 80 lbs per bike capacity. I have linked a review video below so you can see the functions of this bike rack.

expert reply by: Jerred H

1

Dual Ball Mount
(click to enlarge)

Answer 1

Yes, the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes, #HLY64FR, has an anti-rattle hitch pin and hitch tightener to reduce movement of rack in hitch receiver.

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 3

For your 4x6 utility trailer, I recommend using the Taskmaster 4.80R12 Radial Trailer Tire part #TT48012C. This tire has a radial ply construction which will be better for the longer highway trips you intended to make. It has a load range C rating…

view full answer...

Answer 4

You would either need the Demco Autoslide 5th Wheel Hitch #DM29GV which already has the Side Plates #DM49GV. Or if you already have the Demco Autoslide 5th Wheel Trailer Hitch #DM8550035 you found you would need to add the Side Plates #DM49GV.…

view full answer...

Answer 5

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 8

I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured also.…

view full answer...

Answer 9

We do offer the Trailer Connector Adapter, #HM47425, which converts a 7-pole round connector to a 7-pole flat connector. This adapter works for tow vehicles with combined taillight wiring, meaning that the turn signals and brake lights run on the…

view full answer...

Answer 10

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

view full answer...

Answer 11

I recommend going with the Curt Trailer Hitch Receiver #C11424 for your 2017 Hyundai Elantra as long as it's a Sedan (excluding the Sport edition). I like the Curt hitches because they tend to have a thicker powder coat which helps to protect…

view full answer...

Can I Use the Hollywood Racks RV Rider Bike Rack Behind a Motorhome?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching