What Thickness of RV Door Does the Deluxe Window Frame for RV Entry Doors Fit

Question

Question:

I have a question about item# 37211011. What diameter door will this fit and what glass thickness do I need?

asked by: Paul

0

Expert Reply:

The Deluxe Window Frame for RV Entry Doors # 37211011 fits RV doors up to 1-3/8" thick and requires the RV Entrance Door Glass # VAL58GR.

expert reply by: Scott S

0

Answer 1

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

view full answer...

Answer 2

The Valterra Entry Door Window Frame Assembly - Exterior - Black #A77051 has frame dimensions of 15-3/4" wide x 24-3/4" tall and glass dimensions of 12" wide x 21" tall. It sounds like this is a perfect replacement for your…

view full answer...

Answer 3

To determine the correct entry door latch for your RV you'll want to remove the back plate of your current latch and measure the cutout hole and the thickness of the door. Once you have the dimensions of your cutout hole you can then find the…

view full answer...

Answer 4

We do not have a slam latch (matching or not) that fits in the door cut out of the Global Link lock that you currently have. Depending on the thickness of the compartment door you may be able to install a Global Link #295-000014 thumb turn cam latch.…

view full answer...

Answer 5

I went to our warehouse to measure the thickness of the Valterra Frame Assembly and Glass for RV Entrance Door #A77051. The two sides' mounting flanges are 1-3/8-inches apart so this would be the ideal thickness of the RV door into which this…

view full answer...

Answer 6

I verified with Lippert that the glass that comes with the Lippert Thin Shade Complete Window Kit #LC806621 measures 12 inches wide x 21 inches tall. This is a snap-in window frame, so you may not be able to retrofit it, and it is also smaller, so…

view full answer...

Answer 7

I checked with Lippert and the window frame, parts #LC363370 in black and #LC363369 in white, fit a door that's 1-1/2 inches.

view full answer...

Answer 8

I have a solution for you, but there is not a window kit that allows for a screened window to be added to your entry door. However, you can use the Valterra Entry Door Window Frame Assembly - Exterior - Black #A77051 which is designed for doors at…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

What Thickness of RV Door Does the Deluxe Window Frame for RV Entry Doors Fit

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching