How is Ball Mount Accessed with EchoHitch that Fits 2007 Mini Cooper

Question

Question:

I have a 2007 Mini Cooper R56 hardtop, two door. Looking at the pictures, does, the tongue and ball have to be mounted prior to installation ?? Looking at pics, I dont see how one can take the tongue off once the trailer is mounted ?

asked by: Joanne N

0

Expert Reply:

You do not have to install a ball mount at same time when installing the EcoHitch part # EH47FR but it is different with this setup. Basically you have to reach under the rear bumper and over the exhaust to install the hitch pin of a ball mount.

expert reply by: Jameson C

0

Answer 1

Your 2012 Mini Cooper S hardtop will require the EcoHitch Hidden Trailer Hitch Receiver #EH47FR. This is currently our only aftermarket receiver custom fit for your specific Mini with the center mounted dual exhaust. I recommend installing the Curt…

view full answer...

Answer 2

When it comes to installing a tow package on your 2013 Mini Cooper The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 1-1/4 inch #EH47FR does not come with a ball mount. When it comes to the draw bar I recommend The Draw-Tite Drawbar for…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

How is Ball Mount Accessed with EchoHitch that Fits 2007 Mini Cooper

Product Page this Question was Asked From

Continue Researching