Can Progressive Dynamics PD4560CSV Replace PD4560K12L Converter

Question

Question:

I have a Progressive Dynamics Converter on my RV model # PD4560k 12l, will a Progressive Dynamics Model PD4560CSV replace it?

asked by: Randel S

1

Helpful Expert Reply:

Yes, the Progressive Dynamics REL 60A 4500 Series Inteli-Power Converter Section # PD4560CSV is the correct replacement for your PD4560K12L.

expert reply by: Robin H

1

Answer 1

The converter #PD4060CSV does choose the charge rate, but it's based on the charge level of the battery. Most likely your battery charge level isn't low enough for the converter to send a larger amperage. Voltage on Lithium batteries is the…

view full answer...

Answer 2

The current version of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4060K does have a switch that allows you to switch to lithium batteries. But this switch didn't get incorporated until 2020. From the picture…

view full answer...

Answer 3

The Progressive Dynamics #PD94FR does indeed have an internal transfer switch, but because of this will require you to have a second hot bus bar for the circuits you want to power with the inverter. If your panel only has one bus bar then you'll…

view full answer...

Answer 4

To calculate power consumption simply multiply wattage by the number of hours it is being used. Remember to consider type of current, AC or DC. The number of watts is equal to amps multiplied by volts. Your battery bank is rated in Amp Hours, AH. If…

view full answer...

Answer 5

The main AC breakers of the #PD4135K should be 30 amp. As far as wiring we have to recommend you stick with Progressive Dynamics and consult a licensed electrician or RV tech for the wiring and install of the kit. On the panel with the fuses the left…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…

view full answer...

Answer 11

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 12

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Can Progressive Dynamics PD4560CSV Replace PD4560K12L Converter

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching