Availability of an Adjustable Pintle Hook Mount for a 2-1/2 Receiver With 20,000LB Trailer Capacity
Question:
do you have this, or something similar in a 2.5 inch shank with around 20,000 pound capacity?
asked by: Josh
Expert Reply:
I do have a couple options for you as the Pro Series Adjustable Pintle Hook Mounting Plate 63072 is only available for a 2" receiver with 14K weight capacity. We do have the Curt Pintle Hook with 2-5/16" Ball # C45908. This is rated for up to 20,000lbs with either the ball or pintle mount and fits 2-1/2" or 3" lunette rings. The Lock Set # C23556 will allow you to secure this to your receiver.
If you prefer to have a more comfortable ride when towing you will want to use the Gen-Y Torsion 2-Ball Mount # 325-GH-1324. This adjustable ball mount uses rubber cords allowing some of the shock that is typically transferred from your trailer to the vehicle to be absorbed. It has a 2" ball rated for 16,000lbs and a 2-5/16" ball rated for 21,000lbs. The pintle hook lock can be used with the 2-5/16" ball and this also fits your 2-1/2" receiver without an adapter. The Lock Set # 34061651-D will allow you to secure this to your receiver.
Products Referenced in This Question
Gen-Y Torsion 2-Ball Mount - 2-1/2" Hitch - 3" Rise/6" Drop - 21K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gray
- Drop - 6 Inch
- Rise - 3 Inch
- Fits 2-1/2 Inch Hitch
- 21000 lbs GTW
- Class V
- Built-In Pintle Hook
- Shock Absorbing
- Stacked Receivers
- Gen-Y Hitch
more information >
InfiniteRule Lock Set for Gen-Y 21K Adjustable Ball Mounts for 2-1/2" Hitches - Qty 3
- Accessories and Parts
- Drop Hitch
- Trailer Hitch Ball Mount
- Locks
- Locking Pin
- InfiniteRule
more information >
Curt Lock Set for Adjustable Channel-Style Mounts
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Steel
- Fits 2 Inch Hitch
- Bent Pin
- 3-1/4 Inch Span
- 4-1/4 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2-5/16 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 8 Inch
- Rise - 2 Inch
- Fits 2-1/2 Inch Hitch
- 20000 lbs GTW
- Built-In Pintle Hook
- CURT
more information >
Continue Researching
- Q&A: Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700
- Q&A: Troubleshooting Kodiak 225 Trailer Brake System that Keeps Breaking Calipers In Half
- Q&A: Is the Blue Ox BXH20262 The Same As Curt 45908
- Q&A: Will the Replacement 2" and 2-5/16" Dual-Sided Ball C45923 Fit the Curt Pintle Hook C45908
- Q&A: Replacement Leaf Spring for 2021 Grand Design Imagine 3250BH
- Q&A: Recommended Ball Mount for Use w/ a Trailer that has a Lunette Ring
- Q&A: Bushing and Bolt For Equalizer 13-140-3 Rear Spring Attachment
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Hitch Receiver Sizes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Pintle-Hitches
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle
- Article: Roadmaster Vehicle Specific Base Plates