Can Solar Panel Converter Output Run to Progressive Dynamics Converter Output

Question

Question:

I have solar panels on my RV currently and their input power comes from the panel and ties into the output section of my current 7355 converter. Can your new pd4655v be hooked up the same way. Let me clarify from the panels to a charge controller to the output side of the new pd4655v and then to the batteries.

asked by: Kevin S

1

Helpful Expert Reply:

Yes, you can hook the output of your solar panel charger to the output of the Progressive Dynamics Replacement Converter Section part # PD4655V like what you have now. This will allow both the converter and the solar panel converter to charge the batteries.

expert reply by: Jameson C

1

Answer 1

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 2

I took a look at the replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4655V that you mention, and unfortunately it will not work with lithium batteries, and should only be used on flooded lead acid, AGM, and gel batteries.

view full answer...

Answer 3

The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp, #PD4655V is what you are looking for. This upgrades or replaces the converter section for 55-amp Parallax/Magnetek, WFCO, or Parallax RV power centers and works with…

view full answer...

Answer 4

Thanks for the pictures! I would be happy to help you. To replace the Parallax 7355 Converter you will need the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel item #PD4655V you were looking at. This is a direct…

view full answer...

Answer 5

Yes, it will! The Parallax/Magnetek or WFCO RV Power Centers #PD4655V will work with Lithium batteries like the Lifepo you mentioned, flooded lead acid, AGM, and gel batteries.

view full answer...

Answer 6

Thanks for the picture. Yes, you are correct the Progressive Dynamics Replacement Section item #PD4655V is the replacement for your Parallax series 7300 model. I am sorry but I do not have a video of this being installed. I have linked the…

view full answer...

Answer 7

Yes, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp, #PD4655V is what you are looking for. This upgrades or replaces the converter section for 55-amp Parallax/Magnetek, WFCO, or Parallax RV power centers and works…

view full answer...

Answer 8

The converter output of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger part #PD4060K should be between 12.6 and 13.6 VDC depending on if a load is present. If you're seeing more than this then it would indeed…

view full answer...

Answer 9

We'd have to recommend you stick to the same amperage like with the part #PD4655V which is the correct replacement for the 7355 model you have currently.

view full answer...

Answer 10

Looking at the attached instructions for your Progressive Dynamics #PD4655V, step 9 reads, "Slide new converter into power center. Route black/white/green wire-set into AC power section and black/white wire pair into DC section. Secure converter…

view full answer...

Answer 11

The main difference between the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger part #PD4060K and part #PD4060LIK is that the former model can charge both lithium and standard batteries such as lead acid/AGM/Etc. whereas the…

view full answer...

Answer 12

The Lithium Converter for WFCO RV Power Centers #PD4655LIV has a BMS (battery management system) which balances the cell voltage and senses the battery voltage to give you the best charge out there. This unit will charge your lithium batteries but it…

view full answer...

Can Solar Panel Converter Output Run to Progressive Dynamics Converter Output

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching