Wiring Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector for Curt Echo Brake Controller
Question:
I got your 4 to 7 pin adapter, p/n #30717 And have a 2023 Toyota Highlander Hybrid LE and need to convert the 4 pin plug dealer installed plug to a 7 pin. For a Curt Echo wireless brake controller. On your 4 to 7n pin adapter, besides the plug, do I only need to connect the Black to Positive battery and the White to grd? I know I dont need the Blue wire, BUT the yellow wire, do I need it???
asked by: Frank P
Expert Reply:
In regards to the Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector part # 30717; the white wire goes to ground, the yellow wire gets tapped up, the black wire goes to the battery, and the blue wire goes into the cab to a trailer brake controller. If you're using a wireless trailer brake controller like the Curt Echo Wireless Brake Controller part # C51180 then the blue wire won't get used.
Instead of the Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector, I recommend the 4 to 7-Way with 4-Way part # ETBC7L as it comes with multiple trailer connectors, a mounting bracket as well as everything else you need for a wireless trailer brake controller like circuit breakers.
Products Referenced in This Question
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 7 Round - Blade
- Tow Ready
more information >
7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Trailer Brake Controller
- Proportional Controller
- Hidden
- Up to 2 Axles
- Smartphone Display
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: Kit to Convert 2021 Vanleigh Pinecrest 335RLP to Electric Over Hydraulic Disc Brakes
- Article: Curt Echo Full Review
- Article: What is Overlanding? How to Start your Overlanding Journey
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How To Setup a 2019 Jeep Cherokee Trailhawk for Flat-Towing
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?