BAK Revolver X4s Hard Tonneau Cover For 2022 Ram 1500 with 5.7 Foot Bed and Multifunction Tail Gate

Question

Question:

Will it fit the new 2022 1500 dodge 5.7 ft bed with the two door tail gate multi function

asked by: John G

0

Expert Reply:

You will need the BAK Revolver X4s Hard Tonneau Cover # BAK24ZR for your 2022 Ram 1500 with the 5.7' bed and multifunction tail gate. The Cover # BAK36ZR you found is for a Toyota Tacoma.

expert reply by: Bud M

0

Answer 1

We do have a few potential options for you, but the RetraxPRO XR Hard Tonneau Cover #RTT-80383 that you mentioned is made to fit a 2017 - 2022 Ford F-250 Super Duty with a 6-3/4 " bed. So this would not be compatible with your truck in the first…

view full answer...

Answer 2

For a tonneau cover that is compatible with your 2022 Ram 1500 with RamBox and multi-function tailgate I recommend the Lomax Hard Tonneau Cover - Folding - Aluminum - Matte Black #LOM54FR. This custom-fit cover has a tri-fold design and a textured…

view full answer...

Answer 3

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 4

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 5

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 6

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 12

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

BAK Revolver X4s Hard Tonneau Cover For 2022 Ram 1500 with 5.7 Foot Bed and Multifunction Tail Gate

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching