Are There Hubs for a Straight Spindle with 1-1/4" or 1-3/8" Diameter
Question:
I’m looking for replacement hub assembly/ or bearing, race, seal kit for 1994 ranger single axle trailer. I believe the spindle is 1 1/4” or 1 3/8”, it does not taper. Hopefully the spindle is still okay to use. I also lost the pin, and bearing buddy. Thank you!
asked by: Jacob M
Expert Reply:
I'd love to help but we don't have any hubs for this axle as it's appears very odd and uncommon. The best option we can offer is a new axle.
In order to choose the correct replacement axle for a trailer you'll first want to start with the weight capacity. The weight capacity can be found on the axle tag in the center of the beam. Then, you'll need to measure the hub face (center of hub face to center of hub face) and spring center (center of spring center to center of spring center). This will then give you the info needed to pick out the correct replacement axle for your trailer. I have also attached a video I did to help others with this same thing so be sure to give that a watch.
The Trailer Axle Beam part # e38GR for example is a 3,500 lb axle which measures measures 89" long at the hub face and 74" at the spring center though these can be moved. I have attached a full list of all our other axles you can choose from once you have the info above.
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: 25580
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Most Popular Wheel Bearings
- Search Results: l44649
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Search Results: 10~36
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Gooseneck Hitch
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: fender
- Video: Dexter Electric Trailer Brake Kit Installation 23-26
- Shop: Suspension Enhancement
- Search Results: safety chains
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer