Recommended Idler Hub To Replace Shorelandr SS818 Hub

Question

Question:

My shorelandr trailer says I need a SS818 kit. What replacement hub will fit that hub kit.

asked by: Giulio G

0

Expert Reply:

We have the # AKIHUB-545-2-EZ-2K which is a direct replacement for the Shorelandr SS818 kit you'd mentioned. The only difference in these kits is the brand.

expert reply by: Samuel C

0

Answer 1

In order to find the correct replacement hubs for your Shoreland'r boat trailer, you need to first know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the…

view full answer...

Answer 2

Thanks for giving me the dimensions and part number of the hub you are looking for. Based on that I can tell that you have a BTR spindle on your trailer. I also was able to determine that you need a bolt pattern of 5 on 4-1/2 inch with 1/2 inch…

view full answer...

Answer 3

If you blow out a grease seal on a trailer hub by overfilling it with grease using a Bearing Buddy the seal would not still be okay as it would need to be replaced but the Bearing Buddy like the #BB1980A-SS would still be fine. It's very easy to…

view full answer...

Answer 4

I did some research, and based off of the Shorelandr part number you gave me ss818, is for a 1-1/16 INCH X 1-1/16 INCH Hub and bearing kit with 1/2" wheel studs and a 5 on 4 1/2 bolt pattern. The Dexter Trailer Idler Hub Assembly for 2,000-lb…

view full answer...

Answer 5

Okay, we definitely have a solution for you here, and I'll start with the clearance; with trailer tires you need to have 3" of clearance from the top of the tire to your fender and at least 1" of clearance between the inside of the tire…

view full answer...

Answer 6

Shoreland'r parts are not something that we carry but their numbers are often associated with common parts. The 4410275 is the same as the GS-1250XDL which doesn't come back to anything we have information on. There is a GS-1250DL which…

view full answer...

Answer 7

I gave Shoreland'r a call and according to the information listed for your VIN, your trailer is equipped with a 1-1/16" spindle. For this you can use Replacement Trailer Hub Bearing, #L44649. Although Shoreland'r was able to provide this…

view full answer...

Answer 8

The Kenda Karrier ST145/R12 Radial Tire, #AM10130, is approximately 1/2 inch larger in diameter and 1 inch wider than a 4.80-12 trailer tire. The main things to consider when moving to a larger tire size is wheel well clearance and weight capacity.…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended Idler Hub To Replace Shorelandr SS818 Hub

Product Page this Question was Asked From

Continue Researching