Troubleshooting Some Trailer Marker Lights Not Working While Others Work
Question:
Wanted to know my side marker lights on the left and back left tail and brake light is but my left side marker lights and right brake lights is not coming on so how can get right side marker light to work
asked by: Glen H
Expert Reply:
With you only having individual lights not working you will need to test the wiring and light bulbs at the lights themselves. You could have a damaged connection if the wiring off the main wiring which would be the reason only certain lights are working. You will need a Test Light # PTW2993 to check the wires going into the lamp are getting the power they need. You can also use it as a jumper to confirm the ground wire has a good connection. By connecting to the ground at the light you may not get the light on the test light but it may cause the marker light to light up if you have a bad ground.
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)