Does Air Lift 1000 Kit Fit 2018 Jeep Wrangler Rubicon with Factory Lift

Question

Question:

I have a 2018 JL Rubicon with Factory Mopar 1.5” lift. Will the Airlift 1000 work with this lift? I see you have made comments regarding aftermarket lifts, just wondering since this is from Mopar and is considered a factory lift

asked by: Santiago L

1

Helpful Expert Reply:

Yes, the Air Lift 1000 kit part # AL60829 is a fit for your 2018 Jeep Wrangler Rubicon. As long as you use the included spacers it will be at the correct height for your vehicle. There's no need for any additional spacers.

expert reply by: Jameson C

1

Answer 1

Yes, the Air Lift 1000 Air Helper Springs for Coil Springs #AL60829 are the correct air bags for your 2021 Jeep Wrangler Rubicon 392. These air bags are confirmed to fit all models of your 2021 Jeep by simply using the included spacers in the…

view full answer...

Answer 2

Yes, we do have just what you're looking for. For your 2021 Jeep Wrangler, we have the Air Lift 1000 Air Helper Springs for Coil Springs #AL60829 which is guaranteed to fit all models of the 2021 Jeep Wrangler. These springs have a load…

view full answer...

Answer 3

I have just the perfect air helper spring upgrade for your 2023 Jeep Wrangler Unlimited! The Air Lift 1000 Air Helper Springs for Coil Springs #AL60829 provides 1,000 pounds of load-leveling support that will help improve safety and ride quality.…

view full answer...

Answer 4

The Air Lift 1000 Air Helper Springs for Coil Springs part #AL60829 which are a fit for a 2021 Jeep Wrangler are only confirmed for factory coil springs. If you have aftermarket coil springs as part of your lift we cannot confirm fit. That said, I…

view full answer...

Answer 5

There is no way we can tell you what lug locks would be used on your 2019 Geo Pro 15TB is. What you're going to need to do is measure the lug studs on the trailer when you pick up the trailer. The most common sizes are: 1/2"-20 short #12CLN,…

view full answer...

Answer 6

I do have an option for you but there isn't hardly any space on the tongue of a NuCamp Tag XL Teardrop Trailer so I don't think weight distribution would be a good choice as there is nowhere for the frame hanger brackets to mount. It's a…

view full answer...

Answer 7

To raise the rear of your 2019 Jeep Wrangler JL 4 door you have a couple options. The first option you mentioned that you already have a weight distribution that works well for you when you have the motorcycle in your toy hauler trailer. Depending on…

view full answer...

Answer 8

Tom, the Air Lift 1000 Air Helper Springs for Coil Springs #AL60829 will work with your Wrangler, but you're going to need to also use the 2" spacer #AL52420 since you have a 4" lift.

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Does Air Lift 1000 Kit Fit 2018 Jeep Wrangler Rubicon with Factory Lift

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching