Replacment Lock for a TorkLift Fortress GasLock

Question

Question:

I managed to lose the male end of the pin lock on my Torklift Propane Lock set A7770. I have the female end see pic. Two Qs: 1. can I get a replacement male pin for that lock set, 2. If not, can I get a replacement pin lock set for the A7770? Thank you!

asked by: David F

0

Expert Reply:

Thanks for the picture! I checked with Torklift and they do not offer a replacement lock for the TorkLift Fortress GasLock Kit item # TLA7770. If you don't want to buy a new kit I recommend using the Bauer Products Padlock item # BA46VR. This padlock has a 1/4" shackle diameter.

expert reply by: Jerred H

0

TorkLift Fortress GasLock
(click to enlarge)

Answer 1

I contacted Tech support at TorkLift for your issue with the Fortress GasLock Kit, #TLA7770. They stated that while they have in the past had a few that fit tightly at first, they have not had any feedback of them not opening or the keys breaking…

view full answer...

Answer 2

You will not have any problem using the TorkLift Fortress GasLock with any propane tank cover. In the attached picture you can see that the lock is not any taller than the metal protective flange (ears) on the top of the propane bottles. For…

view full answer...

Answer 3

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 4

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 7

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

It sounds like when the Redarc Tow-Pro Elite Brake Controller #RED44FR was installed on your 2022 Toyota Highlander that they may have damaged the brake signal wire or tied into the wrong wire. I recommend taking it either back to the shop who…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.

view full answer...

Replacment Lock for a TorkLift Fortress GasLock

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching