Correct Replacement Tabs for Blue Ox Base Plate Kit on a 2014 Jeep Grand Cherokee

Question

Question:

I lost the attachment tabs for my Blue Ox base plates on a 2014 Jeep Grand Cherokee. Which do I need.

asked by: Neil S

0

Expert Reply:

The correct replacement tabs for the Blue Ox Base Plate Ki part # BX1128 which is a fit for a 2014 Jeep Grand Cherokee is the Replacement Attachment Tab Assemblies for Blue Ox Baseplate part # BLU57XR.

expert reply by: Conner L

0

Answer 1

That looks very much like an older Blue Ox base plate. We do offer the Replacement attachment tabs #BLU37XR which are made specifically for the Blue Ox base plate #BX1976 for a 2010 Jeep Liberty. That said, this is just an educated guess as to the…

view full answer...

Answer 2

While we do not have a custom fit option for a 2007 Spartan Chassis we do have several options of universal fit. Please note the attached link to the filtered options and let me know what follow-on questions you have. You will need to make…

view full answer...

Answer 3

You can certainly add a 7-way trailer connector to your trailer with 6 wires. You would simply have 1 pin on the 7-way connector that did not function. I recommend adding a 7-way molded trailer wire connector like part #H20046, and a junction box…

view full answer...

Answer 4

For replacement Blue Ox Base Plate tabs we have the following: Tab Assemblies for Blue Ox Baseplates - Short Front/Short Back - #BLU57XR Tab Assembly for Blue Ox Baseplates - Short Front/Long Back - #BLU37XR Tab Assemblies for Blue Ox Baseplates -…

view full answer...

Answer 5

Sounds like you are needing the Replacement Attachment Tabs #BLU57XR for the Blue Ox Base Plate Kit #BX1128 on your 2012 Jeep Grand Cherokee. If you are referring to something else please let me know and I'd be happy to help you out!

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 11

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 12

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Correct Replacement Tabs for Blue Ox Base Plate Kit on a 2014 Jeep Grand Cherokee

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching