Baseplate Availability For A 2006 Mazda Miata  

I attached a diagram for the 3 wire install of the Roadmaster kit part #154-792-118158 which can be used as a guide for installing the part #TR118821 as well.

I attached a picture that shows where to attach the safety cables when installing the Roadmaster EZ Base Plate kit part #52728-1. Here's the text too though. Attach the ends of the 8” safety cables to the front holes in the cable mounting tabs…

The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, #HM56009 is not a confirmed fit for a 2021 model Ford F-150. For your vehicle I suggest the Tow Ready Tail Light Isolating Diode System with 4-Pole Connector #TR118821.

The part you are looking for as a replacement piece for your RoadMaster Falcon Tow Bar #RM-522 is the RoadMaster Base Bar #RM-067. It attaches to the quick disconnects on your vehicle. If you also need the Quick Disconnects, they are part #RM-222.

The Demco Commander II Non-Binding Tow Bar #DM9511012-BX is designed to work with Blue Ox baseplates, but can also be used with Demco Classic and Tabless base plates. I recommend verifying exactly what you have before purchasing a new tow bar. If you…

When flat towing a vehicle you cannot reverse the setup at all. You'd have to disconnect the towed vehicle and reverse it by itself before reversing the motorhome. If you attempted to do this you'd most likely damage the tow bar and vehicle.…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…