Is The TST TPMS Sensor Kit With The 770 Monitor Available

Question

Question:

I want 6 standard tire pressure monitor TST RV with the new 770 screen and I can not find that kit. All I find is theTST 507 RV screen. Can you help me ? Thanks

asked by: David B

0

Expert Reply:

Unfortunately the 770 is only sold through a specific dealer and TST only made a limited number of them and doesn't even carry it themselves so finding one might be a bit of a challenge.

If you can't find it you can still go with the TST TPMS for RVs # TST-507-RV-6-C you were looking at with the 507 monitor or you can go with a system like the TireMinder Smart TPMS for RVs # TPMS-APP-6 that uses your smartphone as the monitor.

expert reply by: Kevin C

0

Answer 1

Blue Ox has an easy system for determining the weight capacity of your spring bars, whereas other companies may use measurements or printed capacity to assist. With Blue Ox, there is a 5 dimple system: No dimples means it is rated for up to 350 lbs…

view full answer...

Answer 2

Trailer tires and wheels do not typically come balanced from the factory like what you see with standard passenger vehicle tires. This isn't usually needed for trailer tires and most car shops don't have the needed setup to properly…

view full answer...

Answer 3

Yes, the extra sensors included in the TireMinder A1AS TPMS for RVs and Trailers w/ Signal Booster #TM79FR can be used with other controllers. The sensors are synced when you get them so you'd have to go through the pairing process like…

view full answer...

Answer 4

You can definitely add more sensors if needed. The TireMinder A1AS TPMS for RVs and Trailers w/ Signal Booster - Bluetooth - 10 Tire Sensors #TM79FR will include 10 sensors, but the monitor can handle up to 22. The TireMinder Brass Tire Sensors…

view full answer...

Answer 5

To replace the batteries of the TPMS Cap sensors included with the TST TPMS for RVs - Color Display - Signal Booster - 6 Tire Sensors #TST-507-RV-6-C you will need to use the included wrench to turn the nut on the sensor counter clockwise. That…

view full answer...

Answer 6

Hello, Phil. Yes, the bolts that go into the adapters at the end of the arms should be torqued. It looks like those are 5/16" grade 5 bolts so they should be torqued to 18 ft lbs. I have included the torque chart below for your reference.

view full answer...

Answer 7

The TST TPMS for RVs with 6 Flow Through Tire Sensors #TST-507-FT-6-C are compatible with steel, chrome, or nickel valve stems. Since you have rubber valve stems you need the kit #TST-507-RV-6-C with the standard sensors instead.

view full answer...

Answer 8

The only difference between the TST TPMS #TST-507-RV-6-C and #TST-507-FT-6-C is the type of tire sensors that are included with each kit. Kit #TST-507-RV-6-C comes with 6 standard tire sensors, whereas kit #TST-507-FT-6-C comes with 6 flow through…

view full answer...

Answer 9

It sounds like you're wanting to use the TST TPMS #TST-507-RV-6-C on a Class A or C RV while towing a trailer, so the best placement of the signal booster is going to be in the rear battery bay of the RV. This will provide the best field of…

view full answer...

Answer 10

From what I was able to find, the Everchill RV Refrigerator w/ Freezer #324-000119 will be a bit smaller size wise so it'll fit into your current cutout but the new unit will be a bit larger capacity wise.

view full answer...

Answer 11

The #TST-507-RV-6-C Truck Systems Technologies Tire Pressure Monitoring System you referenced does indeed include the theft resistant sensors/caps as shown in the provided photo. The caps are removed using the provided wrench. This isn't a…

view full answer...

Is The TST TPMS Sensor Kit With The 770 Monitor Available

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching