Recommended Suspension Enhancement For a 2023 Entegra Vision 29S On 2022 Ford F-53 V8 Chassis

Question

Question:

I am considering installation of Timbrens on 2023 Entegra Vision 29s on a 2022 ford f53 chassis with the v8. GVW is 18000. Do you recommend installing both front and back or if I choose only one, front or back gives the best results - body roll and swaying from trucks/ cross winds are my main concerns - this unit has the bigger front and rear sway bars installed from ford

asked by: Mj

0

Expert Reply:

I have a better solution for you as the Timbren Front # TFFF53B and Rear # TFRF53A will create a very stiff ride for your 2023 Entragra Vision 29S. I feel their jounce springs are great for commercial applications and extreme weights but with the delicate trims and construction of your cabinetry the SumoSprings Front # SSF-170-40-2 and Rear # SSR-184-40-1 are going to be a much better option. These are constructed of a microcellular urethane which is much better at absorbing shock and will not transfer as much shock as the Timbren into your chassis.

Even with you mentioning having the larger sway bars from Ford on your chassis the Roadmaster Front # RM72MR and Rear # RM25VR sway bar are specifically designed for use on your motorhome. The front bar is 2-1/8" in diameter and the rear is 1-3/4". The front is designed as a factory replacement while the rear adds a 2nd bar to the chassis.

expert reply by: Bud M

0

Answer 1

There are a few things to check with your installation of the Demco Stay-IN-Play DUO Supplemental Braking System #DM86VR on your 2022 Jeep Wrangler 4xe: 1. Try plugging off the vacuum hose with a short hose and plug, which will be more than just…

view full answer...

Answer 2

The SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle #SSF-170-40-2 are a confirmed fit and the two piece design does allow for the full suspension travel to allow your vehicle suspension to work to it's best capacity without…

view full answer...

Answer 3

I believe you meant 29S as opposed to 29X, and we do have SumoSprings for your 2020 Entegra Vision 29S on a Ford F-53 chassis. These will do a terrific job of reducing sway, helping keep your motorhome level, and give you an overall better driving…

view full answer...

Answer 4

Although it isn't required, I do recommend removing your wheels when you install the Front #SSF-170-40-2 and Rear #SSR-185-40-1 SumoSprings on your 2001 Winnebago. I spoke with my contact at SumoSprings who said that they have heard of people…

view full answer...

Answer 5

Your 2010 GMC Terrain would have used the Roadmaster EZ Base Plate Kit #523163-1 if you have the Roadmaster Sterling All Terrain #RM-576. Since you upgraded to the 2015 Terrain these parts will actually stay the same so you will just need to get…

view full answer...

Answer 6

I reached out to my contact at Timbren and this is something that is not all that uncommon. If the brake lines on the axle of your 2013 F53 Chassis are underneath the Timbren Rear Suspension Enhancement #TFRF53A you can carefully bend them out of the…

view full answer...

Answer 7

For your 2023 Coachmen Pursuit 31BH you will need the Front SumoSprings Rebel Custom Helper Springs #SSF-170-40-2 and Rear SumoSprings Maxim Custom Helper Springs #SSR-184-40-1. If you were to select only one to install first I recommend the rear…

view full answer...

Answer 8

I spoke to my contact at Timbren and she emailed me a picture of a Timbren #TFRF53A with handwritten dimensions drawn on the picture. See attached picture. I attached installation instructions for this product for you to check out.

view full answer...

Answer 9

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 10

For your 2024 Ford F-53, I recommend checking out the Timbren Front Suspension Enhancement System #TFFF53B for the front, and the Timbren Rear Suspension Enhancement System #TFRF53A for the rear. These kits do not require drilling, will replace your…

view full answer...

Answer 11

I prefer using SumoSprings Rebel Custom Helper Springs #SSF-172-40-2 for the front axle and SumoSprings Maxim Custom Helper Springs #SSR-181-54-1 for the rear of your 2000 National RV Tropi-Cal 6350 motorhome. You have a Ford F-53 chassis with a GVWR…

view full answer...

Answer 12

When comparing the ride quality between the Timbren #TFFF53B and SumoSpring #SSF-172-40-2 I recommend going with the SumoSprings. Although Timbren is a very solid product, the SumoSprings have been proven to have more of a forgiving support over the…

view full answer...

Recommended Suspension Enhancement For a 2023 Entegra Vision 29S On 2022 Ford F-53 V8 Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching