Will The Reese Pro Series 16K Slider Work With The Reese Elite Series Underbed Rail Adapter?

Question

Question:

Will this part work with a Pro Series 16K hitch on a 2022 F250 with OEM Prep Pkg

asked by: Keri R

0

Expert Reply:

Yes, the Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches # RP30156 will work with your Reese Pro Series 5th Wheel Hitch!

I have attached a quick installation video for you to check out as well.

expert reply by: Bryce D

0

Answer 1

Fifth wheel hitches can be pretty tall. Especially if you use a rail kit adapter like the #RP30156 which will add 2-3/4 inches from the floor of the truck bed to the top of the rail kit adapter. Most likely your Pullrite is going to sit too tall to…

view full answer...

Answer 2

The Valley 7054 hitch is pretty old so info on it is harder to come by, but we do know that it is a slider hitch and that it fits the rails that the Reese adapter part #RP30156 provides. So if you have a 7054 hitch and a Ford truck with the factory…

view full answer...

Answer 3

If your SuperGlide will work with industry standard fifth wheel rails that are 22 inches apart then the #RP30156 adapter will work for you. Some of the Pullrite hitches only fit their rails and adapters so if that is the hitch style you have then…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 10

For your 4x6 utility trailer, I recommend using the Taskmaster 4.80R12 Radial Trailer Tire part #TT48012C. This tire has a radial ply construction which will be better for the longer highway trips you intended to make. It has a load range C rating…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Will The Reese Pro Series 16K Slider Work With The Reese Elite Series Underbed Rail Adapter?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching