Recommended Replacement for Shelby 5460A Trailer Winch
Question:
Need a replacement winch for a Shelby 5460A. What options do you have and what is the bolt hole pattern?
asked by: Neil
Helpful Expert Reply:
The Fulton High-Performance 2-Speed Trailer Winch part # F142412 is the perfect replacement for a Shelby 5460A. It has a two speed operation just like your old winch and a bit higher capacity as well at 2,600 lbs compared to the 2,300 lb capacity of the old winch. It can be used with either a rope or strap so you'll likely be able to reuse your existing if in good condition. If not, I recommend the Hand Winch Strap with Safety Hook part # DL24260.
In regards to mounting, you should be able to get away without drilling any new holes but I cannot guarantee this as the holes on both winches are slotted so the existing holes may or may not line up with the new slots. That said, only minimal modifications (drilling) would be needed if it doesn't already line up.
I have attached for you below mounting hole dimensions for the Fulton High-Performance 2-Speed Trailer Winch.
(click to enlarge)
Products Referenced in This Question
Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 2,600 lbs.
- Accessories and Parts
- Trailer Winch
- Cables and Straps
- 2 Inch Wide
- 1700 lbs
- Straps
- 20 Feet Long
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 2,600 lbs.
- Accessories and Parts
- Trailer Winch
- Cables and Straps
- 2 Inch Wide
- 1700 lbs
- Straps
- 20 Feet Long
- Dutton-Lainson
more information >
Continue Researching
- Shop: Single-Speed Boat Trailer Winch with 20' Strap - 1,800 lbs
- Shop: 2-Speed Boat Trailer Winch with 20' Strap - 2,500 lbs
- Shop: Fulton High-Performance 2-Speed Trailer Winch for Strap or Wire Rope - Zinc - 2,000 lbs
- Q&A: Mounting Hole Dimensions for the Dutton Lainson Winch part # DL14627
- Q&A: Mounting Plate Bolt Hole Dimensions For Fulton XLT Bolt-Thru Swivel Trailer Jack # F26ZR
- Q&A: Mounting Base Dimensions for Fulton Single Speed Trailer Winch # F142306
- Q&A: Does the Dutton-Lainson 14627 Mount Using Existing Shelby 5407B Bolt Pattern
- Q&A: Mounting Hole Spacing for Fulton Winch # F142401
- Shop: Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - Black - 1.5K
- Shop: Dutton-Lainson Hand Winch - Single Speed - Freewheel - 20' Strap - 1,900 lbs
- Shop: Removable 6" Wheel for Dutton-Lainson A-Frame Trailer Jacks - 2" Inner Tube Diameter
- Shop: Fulton Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 12" Lift - Zinc - 1.5K
- Video: Dutton-Lainson Trailer Winch DL24249 Review
- Video: Fulton Trailer Jack - Side Frame Mount Jack - FXPD15L Review
- Video: Dutton-Lainson A-Frame Trailer Jack Removable Wheel Review
- Video: Fulton Trailer Winch - Standard Hand Winch - F142401 Review
- Video: Fulton Single Speed Trailer Winch Review and Installation
- Video: Ultra-Fab Products Trailer Jack UF49-954035 Review
- Q&A: Mounting Bolt Pattern For Dutton-Lainson Hand Winch # DL15440
- Q&A: Mounting Hole Pattern for Dutton-Lainson 3.2K 2-Speed Hand Winch
- Search Results: winch
- Shop: RV Roof Membrane
- Search Results: jif marine
- Video: Fulton Trailer Winch F501110 Review
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
on Accessories and Parts
