bing tracking image
Q & A Icon

Recommended Base Plate and Flat Towing Parts for a 2023 Ford F-150 Tremor  

Question:

Enquiring about ability for tow hitch on an F-150 Tremor. 2023 F-150 tremor. Base plate for dinghy/flat towing behind motor coach

0

Expert Reply:

For your 2023 Ford F-150 Tremor, I recommend the Roadmaster Direct-Connect Base Plate Kit item # RM38VR. This kit has removable arms that are not only the easiest to connect a tow bar to but are completely removable. This will give your truck as close to a factory look as possible when removed.

Some other parts you will need to flat tow your F-150 are listed below along with any installation videos we may have. Feel free to email me back if you have any other questions or concerns.

Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643

Wiring Harness - For LED Lights - Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights item # RM38FR

Incandescent Lights - Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage Incandescent Tail Lights item # RM26FR

Supplemental Braking System - Blue Ox Patriot Radio Frequency, Portable Braking System item # BLU37TR

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.

expert reply by:
0
Jerred H

Steven F.

3/4/2024

I have a 2023 F-150 STX (4x4) that I have flat-towed multiple time with no issue. I’m looking for a 6pin setup. I currently have a 4 pin quick connect that was super easy to install. I have a 7pin to 6pin curly chord connector from my rv to the toad. I currently have to use an adapter, because of the 4 pin quick connect that I installed. Do you have a bracket for a 6pin? I’d like to securely mount a 6pin receiver on the front of my truck.

Etrailer Expert

Jerred H.

3/4/2024

@StevenF We sure do! It is the Roadmaster Bent Electrical Socket Bracket item # RM-910030-5. We also have the RoadMaster 6-Wire Trailer Connector item # RM-910030-7 if you don't already have a 6-pin for your F-150.

Products Referenced in This Question







Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.