Replacement For Boat Trailer Lights S2T216AP2

Question

Question:

I am looking for replacement boat trailer lights for optronics S2T216AP2

asked by: Marsha

0

Expert Reply:

The correct replacement for your for your S2T216AP2 is # STL16RB for the passenger side and # STL17RB for the driver side.

expert reply by: Kyle S

0

Answer 1

From what we've found online, the proper replacement for your S2T216AP2 is #STL16RB for the passenger side and #STL17RB for the driver side.

view full answer...

Answer 2

I don't have any reference to the "S2T216AP2 " that you provided but based on my research it sounds like you might have the Optronics LED Combination Trailer Tail Lights part #TLL160RK. If that is the case then the correct replacement…

view full answer...

Answer 3

With doing some research online I found out that The LED Combination Tail Light for Trailers over 80 inch Wide - Submersible - Red - Passenger Side #STL16RB and The LED Tail Light for Trailers Over 80 inch Wide - 8 Function - Submersible - 22 Diodes…

view full answer...

Answer 4

The ONE LED Trailer Tail Light #STL0066RBG is the same light as the STL0066RPG that you currently have. Our item number is different than the manufacturers item number for this particular item. The light will come with new mounting hardware and a 3…

view full answer...

Answer 5

The tail lights you have on your trailer are the ONE LED Trailer Tail Lights part #STL0067RPG for the driver side and part #STL0066RBG for the passenger side. Unfortunately, Optronics does not offer a replacement lens for this particular light so…

view full answer...

Answer 6

On your 2014 Ford F-350 you can remove the existing factory jounce bumper assembly by grasping it firmly and with a twisting and pulling motion, work it until the jounce bumper pops out of the retaining cup. It can also be pried out of the retaining…

view full answer...

Answer 7

In order to replace your Carrier Air V RV Air Conditioner I highly recommend using the Advent Air Replacement RV Air Conditioner for Carrier Setup part #ACCAR150 for 13,500 Btu's or part #ACCAR135 for 15,000 Btu's. This unit will be the only…

view full answer...

Answer 8

I looked up several pictures of your ez loader Starcraft trailer and they all had taillight assemblies like the part #STL16RB that you referenced which means that for replacement lenses you would need the #A16RB.

view full answer...

Answer 9

Based on the number you listed the light fixtures you need is the kit part #TLL160RK for both lights or just part #STL116RB for right hand or part #STL117RB for left hand.

view full answer...

Answer 10

Based on the number you mentioned and other customers who have mentioned it the replacement side lens SHOULD be the part #AL17RB. I say should because the SAE number isn't a part number which means it's not always reliable to pick out…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...