Replacement Hub/Rotor Assembly Kit for Kodiak HRCM-133-8XL Hub/Rotor
Question:
Hi, I have a 2007 DRV Mobile Suites that has the Kodiak hrcm-133-8xl brake kit on a Lippert LC180 axle, I need to replace the hub/rotor assembly. Is there a one piece hub/rotor that will fit this application without having to change the calipers and brackets? Thanks
asked by: John
Expert Reply:
According to my research you need a replacement hub from Dexter Axle which means you'll need to replace evrything so everything is the same brand and matches correctly. To replace your hub/rotor you should be able to use the Dexter Disc Brake Assembly # K71-646-90 which comes with the 12-1/4" rotor, an 8 on 6-1/2" bolt pattern for 9/16" lugs, and then a 50mm bearing cartridge.
I recommend verifying these parts match for your application. Unfortunately we don't have just a Kodiak hub/rotor to fit your application as all of ours use standard bearings instead of the 50mm cartridge.
Product Page this Question was Asked From
Dexter Disc Brake Assembly - 12-1/4" Hub/Rotor - 8 on 6-1/2 - E-Coat - 8K - Nev-R-Lube
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 8000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Dexter
more information >
Continue Researching
- Shop: Dexter Disc Brake Assembly - 12-1/4" Hub/Rotor - 8 on 6-1/2 - E-Coat - 8K - Nev-R-Lube
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 5/8" Bolts - 8,000 lbs
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 9/16" Bolts - 7,000 lbs to 8,000 lbs
- Shop: Dexter Trailer Hub - Nev-R-Lube - 8 on 6-1/2 - E-Coat - 9/16" Bolts - 8,000 lbs
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - E-Coat - 5/8" Bolts - 7,000 lbs to 8,000 lbs
- Shop: Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 8,000-lb AL-KO/Quality
- Shop: Dexter Disc Brake Assembly - 12-1/4" Hub/Rotor - 8 on 6-1/2 - E-Coat - 8K - Nev-R-Lube
- Search Results: kodiak 225
- Search Results: kodiak
- Search Results: never lube hubs
- Search Results: kodiak brake pads
- Search Results: nev r lube bearings
- Q&A: Replacement Seal for National Seal or Timken Seal 472920
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25580
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Video: Choosing the Right Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Shop: Brake Controller
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
on Accessories and Parts
