Availability of Replacement Hardware Kit for Custom Towing Mirrors on a 2002 Jeep Grand Cherokee

Question

Question:

I am in need of replacement attaching hardware for these mirrors. I s there a hardware kit available for this part #

asked by: scott

0

Expert Reply:

Yes, we have the replacement hardware for your Original Custom Towing Mirror, item # CTM3400A. You will need the Replacement Hardware Kit, item # KLV-2210.

expert reply by: Robert G

0

Answer 1

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 2

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 3

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The K-Source Snap & Zap Custom Towing Mirrors #KS80930 I feel are the best mirrors extensions for your 2024 GMC Sierra 1500. These have all the cut outs for turn signals, puddle lights and cameras you may have on your mirrors. The snap on design…

view full answer...

Answer 6

The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31088 you were looking at is confirmed to fit your 2019 Chevrolet Silverado 1500 LT 4WD with the 5.3L V8. You are correct that you will need to trim the fascia to allow the hitch to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Availability of Replacement Hardware Kit for Custom Towing Mirrors on a 2002 Jeep Grand Cherokee

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching