Replacement for 214-1001 Motor on RV Steps

Question

Question:

need to get a new motor for my RV step part says AM Equipment made in Korea 214-1001 Rev 15 12V 18NM 1L10

asked by: Jay B

0

Expert Reply:

Thanks for reaching out!

For your application you need the Replacement Motor for Kwikee Electric RV Steps # LC379147, as long as your steps were manufactured after 2005. If your steps were manufactured prior to 2005 then we need to get you a whole new step assembly as there aren't any motors that will work with it. You'll want to locate a sticker on the underside of the steps for the date the steps were manufactured.

Let me know if you have that older model and I can help you find a suitable replacement for your steps.

expert reply by: Jon G

0

Answer 1

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

view full answer...

Answer 2

After a bit of cross referencing I found that you have the Kwikee 32 series steps, and they were manufactured in 2005, so the correct motor is the Replacement Motor for Kwikee Electric RV Steps #LC379147. If you are needing more than the motor, the…

view full answer...

Answer 3

If the steps on your motorhome aren't retracting but are making a clicking noise most likely a bad motor is the culprit. To replace the 366043 motor for your Kwikee Step Assembly you will just need the part #LC379147. This is a direct replacement…

view full answer...

Answer 4

I was able to trace the 1235-x part number you provided in your question to a Glo-Brite light assembly, but I was unable to locate the actual dimensions and color of the lens. Glo-Brite is no longer in business, so an exact replacement lens might be…

view full answer...

Answer 5

We have lights that are similar to the Glo-Brite 122R and 122Y lights but not exact replacements. I recommend the Optronics Clearance or Side Marker Trailer Light - Incandescent - Oblong - Red Lens #MC68RB and Amber Lens #MC68AB which are 3-1/2"…

view full answer...

Answer 6

We've checked with the manufacturer of the Power Gear slide out motors like you have and have determined that the correct replacement motor is the part #LC386327.

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 11

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Replacement for 214-1001 Motor on RV Steps

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching