Does the Electric Jack with Footplate Need a Ground to Function
Question:
I have a 2007 Silverado LTZ Z71. I purchased this for my tandem axle cargo trailer. When I plug it into my 7 pin connector on the truck, I get nothing. I have yet to j stall it because I want to make sure it works before going through the work of installing. Correct me if I am wrong, but since that unit is powered through the 7 pin connector, I shouldn’t have to install it in order for it to ground the 7 pin takes care of that?!?! And if I am right, what could be the issue. My fuses under the hood are good, the fuse on the jack is good.
asked by: Matthew D
Expert Reply:
The Electric Jack with Footplate part # EJ-3520-BBX only has one wire which is for power. There is no ground wire as it uses the mounting plate for the ground. Therefore, in order for the jack to work properly you'll need it mounted to the frame as well as hooked up to the battery for power. It will not ground through the trailer connector.
Product Page this Question was Asked From
Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Steel
- 3001 - 4000 lbs
- Electric Jack
- 18 Inch Lift
- Bolt-On
- 1 Jack
- etrailer
more information >
Continue Researching
- Video: Draw-Tite Chrome Hitch Ball Installation
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Video: Review of Empire Faucets RV Faucets - Brushed Nickel RV Kitchen Faucet With Pull Down Spout - EM42HR
- Shop: RV Mattress
- Shop: 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 20,000 lbs
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Shop: 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Shop: 2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs
- Video: Fastway e2 Weight Distribution System Review
- Video: Review of Fastway Weight Distribution Hitch - e2 600 LBS TW WD With Sway Control - FA92-00-0600
- Q&A: Best Shock Absorbing Shank and Weight Distribution Combination for a Trailer with GVWR of 6000 LBs
- Q&A: Recommended Weight Distribution and Brake Controller for a 2014 Airstream Sport 16
- Shop: Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black
- Video: Review of Empire Faucets RV Faucets - Kitchen Faucet - EM34JR
- Video: Empire Faucets RV Kitchen Faucet with Pull-Down Spout Installation
- Video: Phoenix Faucets RV Faucets - Kitchen Faucet - PF231441 Review
- Article: Determining Trailer Tongue Weight
- Search Results: fa92~00~0600
- Search Results: pex fitting
- Q&A: Power Connection for etrailer Electric Tongue Jack EJ-3527-BBX
- Shop: Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Search Results: power hitch jack
- Search Results: weight distribution hitch
- Search Results: jack e up
- Search Results: breakaway switch
- Q&A: Adding An On-Board Trailer Battery to Trailer for Electric Power Tongue Jack
- Q&A: How To Install a Battery On a Trailer for Use with Electric Jack
- Q&A: Do I Wire my Power jack to the Junction Box or Directly to the Battery
- Q&A: Can I Wire and Electric Trailer Jack Directly to the Truck Battery