Recommended Wiring Harness for a 2023 Mazda CX-5

Question

Question:

Mazda CX-5 2023 4-way?

asked by: Miguel

0

Expert Reply:

I just checked with all of our vendors and the correct custom fit wiring harness available for the 2023 Mazda CX-5 is the T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C45FV.

expert reply by: Jerred H

0

Answer 1

Yes, the Curt T-Connector Vehicle Wiring Harness #C45FV will fit your 2023 Mazda CX-5. I have linked an installation video below showing the installation on your vehicle.

view full answer...

Answer 2

The Curt Upgraded Circuit Protected Powered Tail Light Converter #C56496 along with the Powered Converter Wiring Kit #55151 are what you need to add wiring to your 2022 Mazda CX-5. Sometimes our fit system needs adjustments made and this is one of…

view full answer...

Answer 3

For a 4-way that fits your 2023 Mazda CX-5 you would want the Curt #C45FV which installs easily and is very reliable. The #18144 is compatible with this 4-way and basically any 4-way out there, but with that said the trailer wiring that fits your…

view full answer...

Answer 4

For a hitch that fits your 2023 Mazda CX-5 Carbone Edition I recommend the etrailer #e98902. This hitch has a concealed cross tube and a bolt-on installation. What sets it apart from others is the matte black finish. This gives it an OEM look and…

view full answer...

Answer 5

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Wiring Harness for a 2023 Mazda CX-5

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching