Can You Swap Easy Grease Caps onto the Trailer Hub and Drum Assembly - 3,500 lb Axles - 10"
Question:
I have 4 items in my cart. My question concerns item #AKHD-545-35-K. Will I be able to use my existing grease zerk cap, so that I wont need to remove the wheel to access the grease fitting? Thanks in advance.
asked by: Jeff S
Expert Reply:
The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased is offered with two different grease caps, part # AKHD-545-35-K for standard or part # AKHD-545-35-EZ-K for easy lube spindles. I suppose you could order the hub that comes with standard grease caps and just reuse your easy lube caps but I recommend the hub that comes with the easy lube grease caps since you would get newer, better components this way.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: 7-Way Molded Trailer Wire Connector, 4' Long
- Shop: Brake Controller
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Mounting Hardware for 10" Brake Assemblies
- Q&A: Difference between etrailer.com Hub/Drums AKHD-545-35-K and AKHD-545-35-EZ-K
- Q&A: Replacement Hub for AxleTek Hub # BD2-545-17
- Q&A: Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
- Q&A: Which Pin On 7-Way Connector Is The Ground
- Search Results: grease cap 1.78
- Video: Review of etrailer Hitch Alignment - Hitch Pin Alignment Collar - e98942
- Video: Best Trailer Brake Options
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Video: Choosing the Right Trailer Wiring
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Shop: Trailer Wiring
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25580
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Shop: Fifth Wheel Hitch
- Search Results: dust caps