Is Progressive Dynamics Replacement Converter Compatible With Lithium

Question

Question:

It appears that I need to purchase a PD4645V to replace my converter section. I am thinking of upgrading to lithium batteries in the near future and I noticed that this replacement does not mention anything about charging Lithium batteries. Is there a different unit that is needed for that application?

asked by: Chuck S

0

Expert Reply:

The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers # PD4645V is compatible with lithium batteries. Although it is not specifically listed, all current parts from Progressive Dynamics like this converter are designed to work with lithium batteries.

expert reply by: Robin H

0

Answer 1

The max amperage draw of the MaxxAir MaxxFan Mini RV roof vent part #MA00-04401M that you referenced is 5 amps.

view full answer...

Answer 2

The difference between the MaxxAir MaxxFan Mini Roof Vent #MA00-04401M and the MaxxFan Roof Vent #MA00A04401K does indeed simply have to do with its profile. The MaxxAir Mini Roof Vent will only extend 2-7/8 inches above the roof when it's closed…

view full answer...

Answer 3

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Answer 4

Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is what you need as a replacement lithium compatible converter for your 6345 Parallax model.

view full answer...

Answer 5

Yes, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4645V is a direct replacement for a Magnetek Model 6345 Converter.

view full answer...

Answer 6

You are correct, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V does have a small, easily accessible jumper that switches the charger from "charge wizard" for all lead-acid batteries, to…

view full answer...

Answer 7

Yes. You can use the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V to replace your Magnetek 7345.

view full answer...

Answer 8

The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers #PD4645V is exactly what you need for your Magnetek 7300. I reached out to my contact at Progressive Dynamics who confirmed this.

view full answer...

Answer 9

The instructions for the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel - 45 Amp #PD4645V have multiple model numbers on them since each model has basically the same installation instructions. They do breakout each model…

view full answer...

Answer 10

Yes, the Replacement Converter part #PD4645V does have a lithium mode that you can select that will allow it to charge lithium batteries.

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Is Progressive Dynamics Replacement Converter Compatible With Lithium

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching