Power On No Picture Swift Hitch Digital Wireless Hitch Alignment Camera and Monitor SH02Digital
Question:
Purchased a Swift Hitch SH02D in December 2020 from etrailer.com and have been very happy with it. However the last time I tried to use it the camera would not connect to the receiver. Both units are charged and both power up normally but the receiver does not show any signal from the camera. I contacted Swift Hitch directly by e-mail but they did not respond. Are there any troubleshooting steps to follow? Or a way to reset the camera and receiver? Do you have any other thoughts on what the problem might be?
asked by: John C
Expert Reply:
I am not aware of any repairing or reset procedure for the Swift Hitch Digital Wireless Hitch Alignment Camera and Monitor part # SH02Digital. It sounds like there may be a hardware issue with the signal transmission which is unfortunately unrepairable. If you are outside of the one year warranty period you'll have to replace the system. If you're looking to get away from wireless, the Hopkins Smart Hitch Backup Camera and Hitch Aligner System part # HM50002 is a great wired option.
Products Referenced in This Question
Hopkins Smart Hitch Backup Camera and Hitch Aligner System
- Backup Camera
- Hitch Alignment Camera Systems
- Hardwired
- Dash Monitor
- 3.5 Inch Display
- Hopkins
more information >
Product Page this Question was Asked From
Swift Hitch Digital Wireless Hitch Alignment Camera and Monitor - Night Vision - 8-Hr Camera Battery
- Backup Camera
- Hitch Alignment Camera Systems
- Wireless Signal
- Hand-Held Monitor
- 2.5 Inch Display
- Swift Hitch
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 8K GTW, 800 lbs TW
- Shop: Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Blue Ox TrackPro Weight Distribution w/ Sway Control - 9-Hole Shank - 10K GTW, 1K TW
- Q&A: Torque Specs for the 3/4" Shank Bolts that Attach Shank to Head Unit for Equal-i-zer # EQ37120ET
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 15K GTW, 1,500 lbs TW
- Shop: Reese Weight Dist Shank - 12-1/4" Long - 2" Drop to 6-1/2" Rise - 1,500 lbs TW
- Shop: Reese Weight Distribution Shank for 2" Hitches - 9 Hole Adjustment - 1,200 lb TW
- Q&A: What Size Wrench is Needed to Tighten Adjustment Nuts on Reese Dual-Cam Sway Control
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Trailer Hitch
- Video: Review of Reese Weight Distribution - WD With Sway Control - RP66073
- Q&A: Repairing Cut-Off Trailer Connector on 2011 Ford F350
- Video: Camco Propane Adapter Manufacturer Review
- Video: Curt Hitch Ball - Gooseneck Hitch Ball - C60601 Review
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 44649
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller
- Search Results: 25580
- Shop: Fifth Wheel Hitch
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: My Trailer Hitch Doesn't Fit
on Hitch Aligners
