Will the Adarac M-Series Ladder Rack Support A Rooftop Tent

Question

Question:

Is this rack capable of holding a roof top tent? Also what is the height of the rack?

asked by: Mike

0

Expert Reply:

The Adarac Aluminum M-Series Custom Truck Bed Ladder Rack # A54KG is capable of holding a rooftop tent, just like the Yakima SkyRise HD Tent # Y07436, and is 12" in height.

expert reply by: Kevin C

0

Answer 1

For your Adarac Custom Truck Bed Ladder Rack, like the Steel #A70490, that you have installed on your Ford F-150, I recommend using the Thule Hull-A-Port Kayak Carrier #TH834. The Adarac crossbars on the systems we have available for your truck…

view full answer...

Answer 2

The Adarac Pro Series Custom Truck Bed Ladder Rack #A4000950 that fits your 5-foot bed 2017 Colorado has a total weight rating of 500-lbs between the two bars so it can be used to support a roof tent so long as the total load of the tent, gear and…

view full answer...

Answer 3

The Thule Upride bike rack #TH599000 can fit the Adarac M-Series ladder rack crossbars as it can attach directly to the top channel of the bars. It would not be able to wrap around the bars though.

view full answer...

Answer 4

As long as the rails of the cover still allow for access to the stake pockets the Adarac Aluminum M-Series Custom Truck Bed Ladder Rack #A29ZA would fit your 2023 Chevy Colorado.

view full answer...

Answer 5

For a fixed ladder rack that fits your 2020 Chevy Silverado 1500 5-3/4 foot bed we have the Adarac Pro Series Ladder Rack part #A4002965 which will work great and is perfectly compatible with your tonneau cover as well. If you wanted a sliding ladder…

view full answer...

Answer 6

We have just what you need with the Yakima OutPost HD Overland Truck Bed Rack w/ Tonneau Cover Adapter item #Y01152-5855. This is a mid level ladder rack that with it's included adapter will fit directly the TS rails of the Elevate system you…

view full answer...

Answer 7

Adarac Custom Truck Bed Ladder Rack #A70450 which fits your 2018 ram 1500 with 5-1/2-foot bed does have a total rated weight capacity of 500-lbs. This means each bar can handle 250-lbs when that load is evenly distributed across the bar. My contact…

view full answer...

Answer 8

I do have an option for you but the only types of ladder racks that will work with a tonneau cover like the BAK Revolver X4 are the stake pocket mounted ones, of which the only we carry are from Adarac, the Adarac Aluminum M-Series Custom Truck Bed…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Will the Adarac M-Series Ladder Rack Support A Rooftop Tent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching