Replacement Idler Hub For 1964 Holsclaw Boat Trailer With 1" Diameter Spindle
Question:
I have a 1964 Holsclaw boat trailer and it needs new wheel hub assemblies . 4D-778 is the trailer I.D. # if that helps. I can’t see any # on the bearings but the grease seal has # 47370. It’s a 4 bolt and instead of lug nuts it has bolts . The tire size is 5.30x 12 x. The spindle that the hub goes on is 1”. And it looks to be approximately 4 1/4” long . The hub assembly is held on by a screw on nut and cotter key. Do you have hubs for this ? Please let me know what other info you may need. It’s an old lightweight boat trailer. The hub is stamped with- HM-162 on it.
asked by: Ralph S
Helpful Expert Reply:
It sounds like you are needing the CE Smith Trailer Hub Assembly # CE13100. This hub fits on a 1" spindle and has the same 4 bolt lug pattern with the threaded bolts that screw into the hub. The grease seal used has the same 1.249" inner diameter as the 47370 that you have on your current hub. It is designed to fit a BT8 Spindle # TRU94FR that is 4-1/4" long on the 1" diameter portion of the spindle.
Products Referenced in This Question
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Q&A: Comparing CE Smith Trailer Hub Assemblies CE13100 and CE13110
- Shop: LED Trailer Tail Light w/ Reflector - Stop, Tail, Turn - Submersible - 7 Diodes - Round - Red Lens
- Video: Performance Tool Hitch Aligners - Rods and Lights - PTW1276 Review
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Pre-Greased
- Shop: Replacement Race for L44643 and L44649 Bearings
- Shop: Performance Tool Vehicle and Trailer Aligner - LED and Yellow Ball
- Video: Review of TruRyde Trailer Spindles - Standard BT8 Spindle - TRU94FR
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13100 Review
- Video: Review of Taskmaster Trailer Tires and Wheels - Wheel Only - TA39RR
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30550 Review
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30630 Review
- Q&A: Kenda vs Taskmaster Wheel and Tire Comparison for 4.80-12 on 4 Bolt Wheel
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: What is the Speed Rating for the 4.80-8 Trailer Tire and Wheel Combo
- Q&A: Torque Specification for 12 Inch Wheel with 4 Lug Nuts on Boat Trailer
- Q&A: Trailer Wheels for a 1984 Holsclaw Trailer
- Q&A: How To Determine Which Spare Hub Assembly Is Correct For Spartan Sport Boat Trailer
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13110 Review
- Search Results: screws
- Search Results: 4 on 4 trailer hub
- Search Results: 4 lug trailer hub
- Search Results: wheel only
- Search Results: fender hardware
- Search Results: hardware
- Search Results: 12192tb
- Shop: Trailer Wiring