Reese 5th Wheel Rails for a 2019 Ford F-350 Super Duty That Already Has Reese Mounting Brackets

Question

Question:

Part number for putting a set of Reese fifth wheel rails in 2019 Ford F-350 super duty. With frame mounts.

asked by: Ed R

0

Expert Reply:

It sounds like you already have the Reese mounting brackets for 5th wheel rails in your 2019 Ford F-350 and are just needing the rails. If that is the case, we have 2 different set of rails depending on if you have the outboard brackets or not.

Outboard Brackets:
- Reese Universal Outboard Base Rails for 5th Wheel Trailer Hitches # RP30153

Complete kit of rails and brackets: Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails # RP56017-53

Non-Outboard Brackets:
- Reese Universal Base Rails for 5th Wheel Trailer Hitches # RP58058

Complete kit of rails and brackets: Reese Quick-Install Custom Installation Kit w/ Base Rails # RP50074-58

If this is not the case, please let me know what brackets you do have and I would be happy to help you find the correct rails.

expert reply by: Scott S

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 3

For replacement Dexter manual adjust brake assemblies to replace your 36-19 you would want the part #23-27 for the right hand side and part #23-26 for the left hand side. These are manual adjust 10 by 2-1/4 inch Dexter brake assemblies that would…

view full answer...

Answer 4

We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend…

view full answer...

Answer 5

I spoke to my contact at Kodiak about the issue you are having and he said that sometimes if a trailer braking system is doing way too much of the braking the pressure can get too high for the calipers and they can break (not brake). He said that the…

view full answer...

Answer 6

Yes, for an adapter to allow an older Signature Series Reese hitch to fit the Ford Hitch Prep package you would need the #RP58419.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The correct Timbren Rear Suspension Enhancement System for a 2020 Ford F-350 Super Duty is part #TFR350SDJ which works on both 2WD and 4WD models. The Timbren Suspension Enhancement System part #TFRTT350J is for models with constant loads like…

view full answer...

Reese 5th Wheel Rails for a 2019 Ford F-350 Super Duty That Already Has Reese Mounting Brackets

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching