Which Roadmaster Steering Stabilizer Fits 2018 Ford F-53 Motorhome GVWR 16k

Question

Question:

What s the correct Roadmaster steering stabilizer for my motorhome chassis. I have a Ford F53 chassis built in 2018. GVWR 16,000 lbs Vin Thanks

asked by: Tom C

0

Expert Reply:

For your 2018 Ford F-53 built on a 16k GVWR the correct Roadmaster steering stabilizer is the Exact Center # RM33RR which we have confirmed with Roadmaster.

expert reply by: Jameson C

0

Answer 1

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a…

view full answer...

Answer 2

As long as your 2019 Coachmen Pursuit Class A Motorhome has an F-53 Chassis you'll need the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR. The installation instructions aren't the best…

view full answer...

Answer 3

The correct steering stabilizer for a 2015 Thor ACE 29.3 on Ford F-53 Chassis is the Roadmaster Exact Center Steering Stabilizer part #RM33RR.

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 11

Yes, the Solera Slide Topper part #LCV000168106 is the correct fit for your flange width of 90-1/2 inches. This specific model has a box width range of 86 to 91-3/4 inches which is perfect for your width listed.

view full answer...

Answer 12

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Which Roadmaster Steering Stabilizer Fits 2018 Ford F-53 Motorhome GVWR 16k

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching