Hitch Lock for a Kuat Transfer V2 Bike Rack for 1-1/4 and 2 Hitches

Question

Question:

I am looking to buy a hitch lock for etrailer item # KU74FR. I have looked at code # HLT -Anti Rattle Hitch Lock for Kuat Transfer Bike Racks 1 1/4. But it specifically says in the features that it is not compatible with the Transfer V2 bike rack. I am wondering what hitch lock is compatible with the transfer V2 bike rack? Thank you!

asked by: Alex

0

Expert Reply:

That is correct, the Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks # HLT does not work with the Kuat Transfer V2 Bike Rack for 2 Bikes # KU74FR because of the built-in anti-rattle system the V2 has. Instead you would need a Kuat hitch lock without a threaded pin.

- Hitch Lock for Kuat Bike Racks # HL1

expert reply by: Scott S

0

Answer 1

If you have the Kuat Transfer V2 #KU84FR you can use the #HLT hitch lock!

view full answer...

Answer 2

Yes, the Yakima universal mighty mount part #Y03590 will fit on the crossbar dimensions of the Malone AirFlow2 Roof Rack #MPG215.

view full answer...

Answer 3

Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories Item #Y03590 are compatible with the Malone Crossbars. They are a universal fit adapter and mount to most crossbars as long as they are not more than 4" wide or 1-1/2"…

view full answer...

Answer 4

We have just the perfect adapter for you! The Universal MightyMounts for Yakima Roof Mounted Accessories #Y03590 per Yakima will adapt your Yakima Raptor Single Bike Rack to the Malone Air Flow 2 Rack. They install easily with no tools. They will fit…

view full answer...

Answer 5

Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks - 1-1/4" and 2" Hitches #HLT has a diameter of 1/2". These locks are threaded specifically to fit Kuat Transfer and NV Core bike racks that fit in 1-1/4" and 2" hitches I…

view full answer...

Answer 6

I called and spoke with my contact at Kuat. He stated that the Bike Rack Hitch Lock for 1-1/4 Inch Racks, #HL1, is made of stainless steel. That would include the 5/16 inch diameter pin and the lock itself. There are no plastic pieces on the lock or…

view full answer...

Answer 7

The correct hitch lock for your Kuat Transfer V2 Bike Rack for 1 Bike - 1-1/4" and 2" Hitches - Wheel Mount #KU64FR is the Hitch Lock for Kuat Bike Racks - 2" Hitches #HL1. This will allow you to lock the Transfer V2 to your vehicles…

view full answer...

Answer 8

The only difference between the #HL1 and #HL2 hitch lock is the diameter. HL1 is 3/8" in diameter and the HL2 is 1/2". Measure the diameter of the hole you have to see which one is closer. If the hole is more than 1/2" you can use…

view full answer...

Answer 9

If you are installing the Kuat Transfer V2 1-bike carrier #KU64FR onto a 2" hitch receiver, then you will want to use Hitch Lock #HL2. If you are installing this bike carrier onto a 1-1/4" receiver then use Hitch Lock #HL1. If you are…

view full answer...

Answer 10

For a replacement hitch pin for your Kuat Transfer V2 for a 1-1/4" hitch, you will need the Hitch Lock for Kuat Bike Racks - 1-1/4" Hitches #HL1. This particular pin has a diameter of 3/8 on an inch and an overall length of 5-3/4 inches.

view full answer...

Answer 11

To add a lock to the hitch part of your Kuat Transfer V2, part #KU74FR or part #KU84FR, you need the part #HL1 for a 1-1/4" hitch receiver or part #HL2 for a 2" hitch receiver, like what you said. Attached is a review video where we use the…

view full answer...

Answer 12

For the Kuat Transfer V2 bike rack #KU74FR the hitch lock you'd want is the part #HL1 since the Transfer V2 has a built in anti-rattle device.

view full answer...

Hitch Lock for a Kuat Transfer V2 Bike Rack for 1-1/4 and 2 Hitches

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching