bing tracking image
Q & A Icon

Parts Needed to Flat Tow 2007 Jeep Wrangler Sahara With 2003 Winnebago Minnie Winnie 29B  

Question:

Hi, I have a 2003 Winnebago Minnie Winnie 29B and a stock 2007 Jeep Wrangler Sahara. I am wondering what all I need to be able to flat tow my Jeep with the motorhome?

0

Expert Reply:

In order to flat tow your 2007 Jeep Wrangler Sahara you will need a base plate kit, tow bar, safety cables, wiring, and a supplemental braking system. I recommend the following for a complete setup:

-Roadmaster Direct-Connect Base Plate Kit # 1429-3

-Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522

-Roadmaster 64" Single Hook, Straight Safety Cables # RM-645

-Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154

-Brake Buddy Select 3 Portable Supplemental Braking System # HM39524

You will also need the Roadmaster 12 Volt Outlet Kit part # RM-9332 along with a battery disconnect # RM-766. This setup will also be compatible with the # RM-4750 you looked at if you want the additional protection for your Jeep. If your Winnebago doesn't have a hitch and wiring you will also need the following:

-Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704

-4-Pole Hardwire Kit with Circuit Tester # 18252 (If you have a combined tail light wiring system)

-Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496 (If you have a separate tail light wiring system)

You will have to determine if you have a combined or separate system to choose the correct wiring harness. It is also likely you will need a high-low adapter. See the attached articles below on how to determine what you need. I have attached a link to all of our high-low adapters for your reference.

expert reply by:
0
Robin H

Products Referenced in This Question












Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>