Correct Lock for Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box 21K Lippert 1621

Question

Question:

What is the correct lock for the GY58GR

asked by: Norm H

0

Expert Reply:

The correct lock for the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box part # GY58GR is the Gen-Y Auto Latch Gooseneck Coupler Lock part # 325-GH-7111.

expert reply by: Conner L

0

Answer 1

I have a solution for you, but the Gen-Y Auto Latch Gooseneck Coupler Lock - 25,000 lbs #325-GH-7111 does not look to be a fit for the Reese Goosebox 18k. The Gen-Y Lock requires a lip, which the Reese does not have. I recommend using Master Lock…

view full answer...

Answer 2

For your Gen-Y Executive Gooseneck Hitch you will need to select either the Auto Latch Gooseneck Coupler Lock #325-GH-7111 (up to 25K) or the Manual Latch Gooseneck Coupler Lock #GY89FR (up to 30K). These are specific to the Gen-Y gooseneck hitches.

view full answer...

Answer 3

Did you have a good ride quality with the Rota-Flex and were just hoping that the MORryde Cushioned 5th Wheel Pin Box #MR44HR would be a lot better, or was the ride quality not great with the Rota-Flex and the MORryde is just as bad? There isn't…

view full answer...

Answer 4

The only way to determine what your pin box's bolt pattern is would be to either get the serial number/RPO number off the tag on the pin box or to use the attached guide below to measure the bolts and crossover those measurements on the included…

view full answer...

Answer 5

The correct Gen-Y Hitch Gooseneck Trailer Hitch for OEM Puck Systems for a 2022 Chevrolet Silverado 2500 is part #GY73XR. This adapter works with both short and long bed models. That said, it's really designed for short bed models since long bed…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but because you…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 11

The etrailer Invisible Base Plate Kit #e86YR is compatible with compatible with all etrailer, Demco, and Blue Ox tow bars so you won't need an adapter to connect to your Aventa II tow bar.

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Correct Lock for Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box 21K Lippert 1621

Product Page this Question was Asked From

Continue Researching